⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County

Barron County, Wisconsin: well depth, water level & drilling cost

✓ 12,016 WI DNR records · verified 2026-06-30

79 ftmedian well depth
57 ft–120 fttypical depth range
31 ftmedian static water level
15 gpmmedian yield (8,274 tests)

How deep are wells in Barron County, Wisconsin?

The median drilled well depth in Barron County is 79 ft, based on 8,623 wells with recorded depths in the state WI DNR database. Half of all wells fall between 57 ft and 120 ft; 90% are shallower than 179 ft. Wells drilled since 2016 have a median depth of 80 ft.

How much does it cost to drill a well in Barron County?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Barron County?

The median static water level is 31 ft below ground surface (middle half of wells: 20 ft–54 ft), from 8,474 measurements.

How much water do wells in Barron County produce?

The median tested yield is 15 gpm (middle half: 12 gpm–18 gpm), from 8,274 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Barron County address — $19

Drilled depth distribution

0–50 ft 1,639 50–100 ft 3,838 100–150 ft 1,767 150–200 ft 828 200–300 ft 480 300–400 ft 54 400–600 ft 14 600+ ft 3

Who drills wells in Barron County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
AQUA-SERVICE INC525
KRAMER WELL DRILLING LLC405
FEDIE, DONALD S123
MIDWEST HYDROFRACKING LLC88
D M B DRILLING CO INC88
MIDWEST WELL DRILLING & HYDROFRACKING LLC85
KOMAREK, THEODORE34
BEECROFT, JEREMY R32

Get quotes from local drillers

Looking at a specific property in Barron County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.