⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County

Calumet County, Wisconsin: well depth, water level & drilling cost

✓ 4,583 WI DNR records · verified 2026-06-30

180 ftmedian well depth
120 ft–293 fttypical depth range
45 ftmedian static water level
20 gpmmedian yield (2,246 tests)

How deep are wells in Calumet County, Wisconsin?

The median drilled well depth in Calumet County is 180 ft, based on 2,352 wells with recorded depths in the state WI DNR database. Half of all wells fall between 120 ft and 293 ft; 90% are shallower than 420 ft. Wells drilled since 2016 have a median depth of 185 ft.

How much does it cost to drill a well in Calumet County?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Calumet County?

The median static water level is 45 ft below ground surface (middle half of wells: 25 ft–85 ft), from 2,290 measurements.

How much water do wells in Calumet County produce?

The median tested yield is 20 gpm (middle half: 12 gpm–25 gpm), from 2,246 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Calumet County address — $19

Drilled depth distribution

0–50 ft 25 50–100 ft 271 100–150 ft 648 150–200 ft 383 200–300 ft 443 300–400 ft 288 400–600 ft 239 600+ ft 55

Who drills wells in Calumet County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
HINTZKE WELL DRILLING INC125
GROUND SOURCE INC113
VAN DE YACHT LEO WELL DRILLING INC56
STEFFES, DANIEL J35
DANIEL J STEFFES16
LUISIER WELL DRILLING INC11
WELLS BY WELCH - BENTLEY WD LLC5
WESLOW WATER SYSTEMS INC4

Get quotes from local drillers

Looking at a specific property in Calumet County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.