⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Crawford County

Crawford County, Wisconsin: well depth, water level & drilling cost

✓ 3,055 WI DNR records · verified 2026-06-30

200 ftmedian well depth
120 ft–410 fttypical depth range
160 ftmedian static water level
10 gpmmedian yield (1,877 tests)

How deep are wells in Crawford County, Wisconsin?

The median drilled well depth in Crawford County is 200 ft, based on 2,900 wells with recorded depths in the state WI DNR database. Half of all wells fall between 120 ft and 410 ft; 90% are shallower than 520 ft. Wells drilled since 2016 have a median depth of 322 ft.

How much does it cost to drill a well in Crawford County?

Applying published per-foot rates to the local median depth of 322 ft: drilling and casing alone typically runs $8,050–$20,930; a complete system including pump, pressure tank, and hookup typically runs $19,320–$32,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Crawford County?

The median static water level is 160 ft below ground surface (middle half of wells: 54 ft–322 ft), from 1,890 measurements.

How much water do wells in Crawford County produce?

The median tested yield is 10 gpm (middle half: 10 gpm–20 gpm), from 1,877 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Crawford County address — $19

Drilled depth distribution

0–50 ft 12 50–100 ft 308 100–150 ft 823 150–200 ft 292 200–300 ft 279 300–400 ft 383 400–600 ft 732 600+ ft 71

Who drills wells in Crawford County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
KOUBA DRILLING LLC165
FAHERTY, JEFFERY A145
SAM'S WELL DRILLING INC64
CORPIAN WELL DRILLING INC38
NELSONS PLBG & ELEC INC20
SAM'S WELL DRILLING5
LYSAKER, TIMOTHY M2
SCHAITEL, JAKE J2

Get quotes from local drillers

Looking at a specific property in Crawford County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.