⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Florence County

Florence County, Wisconsin: well depth, water level & drilling cost

✓ 2,907 WI DNR records · verified 2026-06-30

83 ftmedian well depth
60 ft–180 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (2,066 tests)

How deep are wells in Florence County, Wisconsin?

The median drilled well depth in Florence County is 83 ft, based on 2,137 wells with recorded depths in the state WI DNR database. Half of all wells fall between 60 ft and 180 ft; 90% are shallower than 281 ft. Wells drilled since 2016 have a median depth of 83 ft.

How much does it cost to drill a well in Florence County?

Applying published per-foot rates to the local median depth of 83 ft: drilling and casing alone typically runs $2,075–$5,395; a complete system including pump, pressure tank, and hookup typically runs $4,980–$8,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Florence County?

The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–49 ft), from 2,108 measurements.

How much water do wells in Florence County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–20 gpm), from 2,066 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Florence County address — $19

Drilled depth distribution

0–50 ft 356 50–100 ft 862 100–150 ft 295 150–200 ft 146 200–300 ft 285 300–400 ft 173 400–600 ft 20 600+ ft 0

Who drills wells in Florence County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
MORIN, DOUGLAS J70
KLEIMAN PUMP & WELL DRILLING INC52
LUISIER WELL DRILLING INC49
KLEIMAN, ERIK P37
DOUGLAS J MORIN26
ARNESON WELL DRILLING LLC20
T & T WELL DRILLING & PUMP SERVICE17
DRILL BABY DRILL LLC7

Get quotes from local drillers

Looking at a specific property in Florence County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.