⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County

Iowa County, Wisconsin: well depth, water level & drilling cost

✓ 5,201 WI DNR records · verified 2026-06-30

224 ftmedian well depth
140 ft–300 fttypical depth range
120 ftmedian static water level
20 gpmmedian yield (2,375 tests)

How deep are wells in Iowa County, Wisconsin?

The median drilled well depth in Iowa County is 224 ft, based on 3,638 wells with recorded depths in the state WI DNR database. Half of all wells fall between 140 ft and 300 ft; 90% are shallower than 351 ft. Wells drilled since 2016 have a median depth of 265 ft.

How much does it cost to drill a well in Iowa County?

Applying published per-foot rates to the local median depth of 265 ft: drilling and casing alone typically runs $6,625–$17,225; a complete system including pump, pressure tank, and hookup typically runs $15,900–$26,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Iowa County?

The median static water level is 120 ft below ground surface (middle half of wells: 45 ft–185 ft), from 2,601 measurements.

How much water do wells in Iowa County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–20 gpm), from 2,375 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Iowa County address — $19

Drilled depth distribution

0–50 ft 234 50–100 ft 191 100–150 ft 599 150–200 ft 437 200–300 ft 1,218 300–400 ft 792 400–600 ft 156 600+ ft 11

Who drills wells in Iowa County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SAM'S WELL DRILLING INC208
FAHERTY, JEFFERY A177
LOVELACE WELL DRILLING INC76
RODAMAKER, ROBERT J35
NIFFENEGGER WELL & PUMP INC31
KOUBA DRILLING LLC12
SAM'S WELL DRILLING6
ROBERT J RODAMAKER3

Get quotes from local drillers

Looking at a specific property in Iowa County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.