⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kenosha County

Kenosha County, Wisconsin: well depth, water level & drilling cost

✓ 17,650 WI DNR records · verified 2026-06-30

116 ftmedian well depth
80 ft–160 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (9,065 tests)

How deep are wells in Kenosha County, Wisconsin?

The median drilled well depth in Kenosha County is 116 ft, based on 9,174 wells with recorded depths in the state WI DNR database. Half of all wells fall between 80 ft and 160 ft; 90% are shallower than 219 ft. Wells drilled since 2016 have a median depth of 110 ft.

How much does it cost to drill a well in Kenosha County?

Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kenosha County?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–70 ft), from 9,122 measurements.

How much water do wells in Kenosha County produce?

The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 9,065 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Kenosha County address — $19

Drilled depth distribution

0–50 ft 628 50–100 ft 2,996 100–150 ft 2,818 150–200 ft 1,514 200–300 ft 1,001 300–400 ft 170 400–600 ft 35 600+ ft 12

Who drills wells in Kenosha County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
GEHRING, LANCE M520
SAM'S WELL DRILLING INC186
LANCE M GEHRING139
GOHLKE WELL DRILLING LLP125
SWEENEY, KENNETH R98
KRIZAN, KENNETH J38
BOYCE, KENNETH D28
GEHRING LANCE WELL DRILLING INC28

Get quotes from local drillers

Looking at a specific property in Kenosha County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.