⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Monroe County

Monroe County, Wisconsin: well depth, water level & drilling cost

✓ 7,665 WI DNR records · verified 2026-06-30

95 ftmedian well depth
63 ft–150 fttypical depth range
42 ftmedian static water level
12 gpmmedian yield (5,324 tests)

How deep are wells in Monroe County, Wisconsin?

The median drilled well depth in Monroe County is 95 ft, based on 5,374 wells with recorded depths in the state WI DNR database. Half of all wells fall between 63 ft and 150 ft; 90% are shallower than 280 ft. Wells drilled since 2016 have a median depth of 102 ft.

How much does it cost to drill a well in Monroe County?

Applying published per-foot rates to the local median depth of 102 ft: drilling and casing alone typically runs $2,550–$6,630; a complete system including pump, pressure tank, and hookup typically runs $6,120–$10,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Monroe County?

The median static water level is 42 ft below ground surface (middle half of wells: 18 ft–92 ft), from 5,358 measurements.

How much water do wells in Monroe County produce?

The median tested yield is 12 gpm (middle half: 10 gpm–15 gpm), from 5,324 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Monroe County address — $19

Drilled depth distribution

0–50 ft 399 50–100 ft 2,377 100–150 ft 1,226 150–200 ft 360 200–300 ft 519 300–400 ft 282 400–600 ft 195 600+ ft 16

Who drills wells in Monroe County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SCHAITEL, JAKE J358
HEEG WELL AND PUMP LLC225
NELSONS PLBG & ELEC INC150
KOUBA DRILLING LLC83
JAKE J SCHAITEL77
RUSH WELL DRILLING LLC21
SAM'S WELL DRILLING INC18
RUSH, JON A16

Get quotes from local drillers

Looking at a specific property in Monroe County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.