⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pepin County

Pepin County, Wisconsin: well depth, water level & drilling cost

✓ 1,858 WI DNR records · verified 2026-06-30

115 ftmedian well depth
80 ft–160 fttypical depth range
60 ftmedian static water level
12 gpmmedian yield (1,138 tests)

How deep are wells in Pepin County, Wisconsin?

The median drilled well depth in Pepin County is 115 ft, based on 1,153 wells with recorded depths in the state WI DNR database. Half of all wells fall between 80 ft and 160 ft; 90% are shallower than 360 ft. Wells drilled since 2016 have a median depth of 124 ft.

How much does it cost to drill a well in Pepin County?

Applying published per-foot rates to the local median depth of 124 ft: drilling and casing alone typically runs $3,100–$8,060; a complete system including pump, pressure tank, and hookup typically runs $7,440–$12,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Pepin County?

The median static water level is 60 ft below ground surface (middle half of wells: 32 ft–97 ft), from 1,157 measurements.

How much water do wells in Pepin County produce?

The median tested yield is 12 gpm (middle half: 10 gpm–15 gpm), from 1,138 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Pepin County address — $19

Drilled depth distribution

0–50 ft 75 50–100 ft 364 100–150 ft 408 150–200 ft 82 200–300 ft 58 300–400 ft 72 400–600 ft 93 600+ ft 1

Who drills wells in Pepin County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
PELKE PLBG & WELL DRLG INC99
HOYER BROTHERS WELL DRILLING INC95
FEDIE, DONALD S19
OIUM, KELLY WELL DRILLING INC10
EDWARD A HARTERT3
KELLY OIUM3
HARTERT, EDWARD A3
PELKE GLEN PLBG HTG & WELL DRLG INC2

Get quotes from local drillers

Looking at a specific property in Pepin County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.