⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County

Sauk County, Wisconsin: well depth, water level & drilling cost

✓ 10,528 WI DNR records · verified 2026-06-30

140 ftmedian well depth
100 ft–200 fttypical depth range
55 ftmedian static water level
18 gpmmedian yield (8,065 tests)

How deep are wells in Sauk County, Wisconsin?

The median drilled well depth in Sauk County is 140 ft, based on 7,741 wells with recorded depths in the state WI DNR database. Half of all wells fall between 100 ft and 200 ft; 90% are shallower than 300 ft. Wells drilled since 2016 have a median depth of 140 ft.

How much does it cost to drill a well in Sauk County?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Sauk County?

The median static water level is 55 ft below ground surface (middle half of wells: 25 ft–93 ft), from 8,556 measurements.

How much water do wells in Sauk County produce?

The median tested yield is 18 gpm (middle half: 12 gpm–20 gpm), from 8,065 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Sauk County address — $19

Drilled depth distribution

0–50 ft 368 50–100 ft 1,245 100–150 ft 2,790 150–200 ft 1,330 200–300 ft 1,193 300–400 ft 517 400–600 ft 283 600+ ft 15

Who drills wells in Sauk County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
SAM'S WELL DRILLING INC520
MARSHALL WELL DRILLING CORP165
KOUBA DRILLING LLC78
RODAMAKER, ROBERT J71
WEBSTER BRAD & SONS DRILLING INC67
SAM'S WELL DRILLING54
MCAFEE WELL DRLG & PUMP SERV INC48
WALKER, BRUCE A27

Get quotes from local drillers

Looking at a specific property in Sauk County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.