⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Taylor County

Taylor County, Wisconsin: well depth, water level & drilling cost

✓ 6,232 WI DNR records · verified 2026-06-30

94 ftmedian well depth
60 ft–140 fttypical depth range
16 ftmedian static water level
7 gpmmedian yield (3,507 tests)

How deep are wells in Taylor County, Wisconsin?

The median drilled well depth in Taylor County is 94 ft, based on 3,554 wells with recorded depths in the state WI DNR database. Half of all wells fall between 60 ft and 140 ft; 90% are shallower than 175 ft. Wells drilled since 2016 have a median depth of 100 ft.

How much does it cost to drill a well in Taylor County?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Taylor County?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–25 ft), from 3,525 measurements.

How much water do wells in Taylor County produce?

The median tested yield is 7 gpm (middle half: 5 gpm–10 gpm), from 3,507 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Taylor County address — $19

Drilled depth distribution

0–50 ft 614 50–100 ft 1,288 100–150 ft 1,033 150–200 ft 386 200–300 ft 203 300–400 ft 20 400–600 ft 7 600+ ft 3

Who drills wells in Taylor County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
BRUNNER WELL DRILLING LLC362
MIDWEST WELL DRILLING & HYDROFRACKING LLC73
KOMAREK, RONALD A SR64
RONALD A KOMAREK SR24
MIDWEST HYDROFRACKING LLC22
KOMAREK SR, RONALD A17
HAUPT WELL DRLG INC10
KOMAREK, THEODORE7

Get quotes from local drillers

Looking at a specific property in Taylor County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.